What is a seamless gutter?
Conventional gutters are made by joining ready-made 2–3 metre sections. Over time, the seals and silicone at these joints wear out, open up and start leaking.
With a seamless gutter, coiled aluminium or painted steel is shaped on-site by a gutter machine and produced in one piece to measure. Joints exist only at corners and downpipe connections.
Why do gutters matter?
A gutter system collects rainwater from the roof and carries it away from the building through downpipes. Without working gutters, water runs straight down the façade and into the foundations, causing damp walls, falling plaster, damage to external insulation and moisture in the foundations over time.
Installation steps
- 1The façade is measured and downpipe positions and fall are planned
- 2Old gutters are removed and the fascia board is checked
- 3The gutter is formed in one piece the length of the façade
- 4Brackets are fixed with a fall that leads water to the downpipe
- 5Corner and downpipe connections are made
- 6Flow is checked with a water test
Benefits
- Very low leak risk thanks to no joints
- A clean, continuous line
- Less maintenance
- Aluminium and painted steel in various colours
- Produced on-site to fit your building
When do you need it?
- Gutters overflow in the rain or drip at the joints
- Damp stains or blistering plaster on exterior walls
- Existing gutters are rusty, cracked or sagging
- You are having a new roof or external insulation installed
Frequently asked questions
What are seamless gutters made of?
Most commonly painted aluminium and painted galvanised steel. Aluminium is light and does not rust; steel is more impact-resistant. We choose the right option for your building and budget during the inspection.
How long does installation take?
For detached houses and small apartment buildings, installation usually takes half a day to a full day. For large buildings with several façades, the timeline is confirmed during the inspection.
How often should gutters be cleaned?
At least once a year, ideally in autumn after the leaves fall. On buildings near trees, gutter guards greatly reduce clogging.



