Skip to content
MKaplan İnşaat

Roofing Systems

Roof Repair and Full Roof Renewal

A small roof problem that is not dealt with in time spreads to the ceiling, the walls and the structure. With a proper assessment we determine when a repair is enough and when a renewal is more economical.

Roof renewal: tiles being laid over waterproofing underlay and battens

The most common roof faults

  1. 1Broken, slipped or wind-blown tiles
  2. 2Leaks at chimney and wall junctions
  3. 3Gaps along ridge and valley lines
  4. 4Loose screws and rust on metal roofs
  5. 5Worn or torn waterproofing underlay
  6. 6Rotten roof boards and rafters

Repair or full renewal?

If the damage is limited to one area and the substructure is generally sound, a local repair is enough. Replacing a few broken tiles or resealing a chimney junction is done quickly.

If the roof is over 20–25 years old, leaks in several places, shows widespread timber rot or loses a lot of heat, a full renewal can be more economical in the long run. We share the costs and benefits of both options openly during the inspection.

What to do in an emergency leak

Put a container under the leak, and switch off the relevant circuit if water is near electrical fittings. Do not climb onto the roof yourself — wet roof surfaces are extremely slippery. Call us; we handle emergency leaks as a priority regardless of the weather.

Full roof renewal steps

  1. 1Removing the existing covering and safely bringing down the debris
  2. 2Checking the structure and replacing rotten timber
  3. 3Adding thermal insulation if needed
  4. 4Laying the waterproofing underlay
  5. 5Installing the new covering (tile or metal)
  6. 6Checking and renewing gutters and downpipes

Benefits

  • Free on-site inspection and a clear diagnosis
  • A transparent comparison of repair and renewal
  • Priority response to emergency leaks
  • Minimum 2-year written workmanship warranty
  • The site is handed over clean

When do you need it?

  • New stains appear on the ceiling after rain
  • Tiles slipped or blew off after a storm
  • There is a musty smell or damp in the attic
  • Your roof has not had a thorough check for over 20 years

Frequently asked questions

How long does a roof repair take?

Local repairs such as replacing tiles or a chimney junction usually take 1 working day. A full renewal of a standard home takes 2–4 working days. We confirm the exact time during the inspection.

Can roofs be repaired in winter?

Repairs and maintenance can be done in winter on days with suitable weather. Full coverings and membrane work need dry weather above 5°C. Emergency leaks are handled regardless of the weather.

Is the leak always right above the ceiling stain?

Not always. Water can run along the underlay and rafters and enter several metres away from where the stain appears. That is why we trace the whole path of the water, not just the spot above the stain.

Tile roof finished with ridge tilesRoofing Systems

Tile Roofing

Traditional-looking, breathable tile roofs with good insulation — new builds and re-laying.

Red metal roof completed on a home overlooking the gulfRoofing Systems

Metal Roofing

A light, fast-to-install and long-lasting roof with trapezoidal sheets or sandwich panels.

Red mineral-surfaced bituminous membrane applied on a flat roofInsulation & Waterproofing

Membrane Roofing

Lasting waterproofing with bituminous membrane on flat roofs, terraces and under pitched roofs.

Free inspection for your project

Our expert team inspects on-site and offers you the best solution with a clear quote.

Call NowWhatsApp