What is a metal roof?
A metal roof consists of profiled metal sheets screwed onto a timber or steel roof frame. The sheets are usually made of galvanised, factory-painted steel, which protects them against rust and offers a range of colours.
Because it is much lighter than tile, it reduces the load on the structure. This is a major advantage when renewing the roofs of older buildings and on wide-span structures.
Trapezoidal sheet vs. sandwich panel
A trapezoidal sheet is a single-layer profiled metal sheet. It is economical, quick to install and commonly used on warehouses, canopies and outbuildings.
A sandwich panel has a polyurethane or stone wool insulation core between two metal sheets. It provides both covering and thermal insulation in one product, making it the better choice for homes and heated buildings.
How is it installed?
- 1An on-site inspection determines the roof pitch, the condition of the structure and the measurements
- 2If needed, the existing covering is removed and rotten timber is replaced
- 3A waterproofing underlay is laid and purlins are prepared
- 4Sheets are fixed with the correct overlap using sealed screws
- 5Ridge, valley, chimney and edge flashings are installed
- 6A final check is carried out and the site is handed over clean
Benefits
- Light weight puts little load on the structure
- Fast installation; most residential roofs take a few working days
- A service life of up to 40–50 years when installed correctly
- Wide choice of colours and profiles
- Covering and thermal insulation in one step with sandwich panels
When do you need it?
- Your tile roof is too heavy and the structure is under strain
- You are building a warehouse, canopy, factory or outbuilding roof
- You want a fast and economical roof renewal
- Your existing metal roof shows rust, loose screws or leaks
Frequently asked questions
Is a metal roof noisy in the rain?
Rain can be heard on a single-layer trapezoidal sheet. For homes we usually recommend insulated sandwich panels; the core material greatly reduces both heat transfer and noise.
Does a metal roof rust?
Galvanised, factory-painted sheets are protected against rust. Rust usually starts at cut edges, scratched surfaces or unsuitable screws, so we use the right cutting tools and sealed screws during installation.
Can a tile roof be converted to a metal roof?
Yes. The existing tiles are removed, the structure is checked and reinforced if necessary, and a purlin layout suitable for metal sheets is installed. We assess whether this conversion suits your building during the inspection.



